Sawmills in Plymouth, MA, would be completely useless without their blades. So it is crucial that sawyers who are considering adding one or more portable sawmills in Plymouth, MA, to their collection of woodworking tools know more about what to look for when they go to pick some out. Read on for more information about the important attributes to consider when you are trying to understand blades.
Most blades are made out of either carbon-alloy steel or silicon-alloy steel. While both are strong, those that are made with the addition of silicon are superior. They can last for many more hours of work at the portable sawmills in Plymouth, MA. However, they also cost more money.
Width Makes Waste
The wider the blade, the more wood that is going to be wasted. That is why sawmills in Plymouth, MA, usually try to stick to purchasing only the thinnest blades that they can get. They work just as well, but with a more narrow pass that doesn’t eat away at the bulk of the logs.
Check the Pitch
The pitch of a blade refers to the distance from the tip of one of the teeth to the tip of the next one that is directly adjacent to it. If the distance is far apart, the teeth are probably larger to make up for it. This type of blade is best for getting a raw, aggressive cut through a large piece of lumber. A blade with a short pitch tends to have teeth that are small and close together. It works best for finishing cuts that a sawyer needs to do.
Sawmill blades are not a one-time cost, especially those of a low quality. After they are purchased, they are only good for several hours of sawmill work before they are already dull. So a sawyer has to either completely replace them or send them to a specialist to have them sharpened. The fee for sharpening is usually no more than a few dollars though.